Comments on: How to Design Efficient Parts for Greatest Usability http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/ SolidWorks Tips and the Coolest Technology, Product Design, and Social Media in the entire world of 3D CAD. Thu, 20 Nov 2008 18:53:55 +0000 http://wordpress.org/?v=2.5.1 By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-149 Albert Whatmough Sun, 04 Nov 2007 07:03:59 +0000 http://www.solidsmack.com/?p=183#comment-149 YES YES YES Bruce Extrude from Mid-Plane This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine. you can use the planes to mate it centered to antother part in an assembly you can add and axis between two planes to create a circular pattern you can created mirrored features you can easly center features on perpendicular faces ..... this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10828 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10828 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10676 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10676 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10593 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10593 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10542 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10542 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10537 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10537 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10540 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10540 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10541 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10541 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10527 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10527 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10531 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10531 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10532 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10532 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10534 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10534 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10535 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10535 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10518 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10518 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10519 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10519 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10522 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10522 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10512 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10512 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10514 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10514 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10515 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10515 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10517 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10517 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10505 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10505 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10507 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10507 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10508 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10508 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10509 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10509 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10510 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10510 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10511 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10511 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10504 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10504 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10365 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10365 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10238 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10238 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10074 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10074 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10048 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10048 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-9903 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-9903 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-9760 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-9760 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-9804 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-9804 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10878 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10878 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10904 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10904 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10921 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10921 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10923 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10923 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10927 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10927 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10930 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10930 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10932 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10932 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10935 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10935 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10936 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10936 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10937 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10937 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10939 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10939 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10940 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10940 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10943 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10943 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10945 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10945 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10948 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10948 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10949 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10949 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10950 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10950 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10951 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10951 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10952 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10952 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10963 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10963 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]> By: Albert Whatmough http://www.solidsmack.com/how-to-design-efficient-parts-for-greatest-usability/2007-06-25/#comment-10965 Albert Whatmough Sun, 04 Nov 2007 06:03:59 +0000 http://www.solidsmack.com/?p=183#comment-10965 YES YES YES Bruce Extrude from Mid-Plane<br><br>This is SO Key... a part that is symtrical around the origin will save you more headaches then you can imagine.<br><br>you can use the planes to mate it centered to antother part in an assembly<br><br>you can add and axis between two planes to create a circular pattern<br><br>you can created mirrored features<br><br>you can easly center features on perpendicular faces<br><br>.....<br><br>this list goes on YES YES YES Bruce Extrude from Mid-Plane

This is SO Key… a part that is symtrical around the origin will save you more headaches then you can imagine.

you can use the planes to mate it centered to antother part in an assembly

you can add and axis between two planes to create a circular pattern

you can created mirrored features

you can easly center features on perpendicular faces

…..

this list goes on

]]>